Vancouver Forklift Training Schools

Vancouver Forklift Training Schools - Forklift Training Schools

If you are searching for a job as an operator of a forklift, our regulatory-compliant forklift training Schools offer exceptional instruction in various types and styles of lift trucks, classes on pre-shift check, fuel kinds and dealing with fuels, and safe use of a lift truck. Hands-on, practical training assists individuals participating in obtaining fundamental operational skills. Program content covers existing regulations governing the utilization of lift trucks. Our proven forklift courses are intended to offer training on these kinds of trucks: counterbalanced forklift, powered pallet trucks and narrow isle forklift.

When the lift truck is in operation, do not lower or raise the forks. Loads must not extend above the backrest. This is because of the possibility of the load sliding back towards the operator. Inspect for overhead obstacles and make certain there is adequate clearance prior to lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it slightly back.

While the load is raised the lift truck will be less steady. Make sure that no pedestrians cross under the elevated fork. The operator must not leave the lift truck while the load is lifted.

While handling pallets, forks must be level and high enough to go into the pallet and extend all the way beneath the load. The width of the forks should provide equal distribution of weight.

Chock the wheels and set the brakes prior to loading and unloading the truck. The floors should be strong enough to support the combined weight of the forklift and its load. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The entrance door height should clear the forklift height by a minimum of 5 cm. Edges of rail cars, ramps and docks must be marked and avoid them.

Click to Download the pdf